EU GMP Chapter 3 – Pharma GMP

Assess Impact of Non-Routine Maintenance Activities in GMP Facilities

digi — Wed, 12 Nov 2025 00:37:31 +0000

Assess Impact of Non-Routine Maintenance Activities in GMP Facilities Do Assess the Impact of Non-Routine Maintenance in GMP Facilities Remember: Any non-routine maintenance must be evaluated for potential quality impact — unassessed activities risk contamination or equipment performance drift. Why This Matters in GMP GMP facilities regularly perform planned maintenance, but non-routine interventions — such...

Never Store Instruments Inside Fume Hoods in GMP Laboratories

digi — Mon, 10 Nov 2025 10:38:00 +0000

Never Store Instruments Inside Fume Hoods in GMP Laboratories Don’t Store Instruments Inside Fume Hoods in GMP Laboratories Remember: Fume hoods are designed for hazardous operations — not for instrument storage. Storing equipment inside them disrupts airflow and increases corrosion risk. Why This Matters in GMP Fume hoods are engineered to contain and exhaust hazardous...

Perform Quarterly Drain Hygiene Audits in GMP Wet Processing Areas

digi — Sun, 19 Oct 2025 10:49:31 +0000

Perform Quarterly Drain Hygiene Audits in GMP Wet Processing Areas Do Perform Quarterly Drain Hygiene Audits in GMP Wet Processing Areas Remember: Schedule quarterly hygiene audits for all drains in GMP wet processing areas — they are critical control points for microbial contamination. Why This Matters in GMP Drains in pharmaceutical manufacturing areas — especially...

Never Open HVAC Control Panels Without Lockout-Tagout in GMP Facilities

digi — Sat, 18 Oct 2025 10:46:13 +0000

Never Open HVAC Control Panels Without Lockout-Tagout in GMP Facilities Don’t Open HVAC Control Panels Without Applying Lockout-Tagout Protocol Remember: Always apply Lockout-Tagout (LOTO) procedures before opening HVAC control panels in GMP facilities — it protects personnel and preserves environmental control systems. Why This Matters in GMP HVAC systems in pharmaceutical environments are essential for...

Never Stack Drums Above Pallet Height Limits in GMP Warehouses

digi — Fri, 17 Oct 2025 11:00:55 +0000

Never Stack Drums Above Pallet Height Limits in GMP Warehouses Don’t Stack Drums Beyond Pallet Height Limits in GMP Warehouses Remember: Never exceed the prescribed pallet height when stacking drums — this avoids safety hazards, material damage, and regulatory non-compliance. Why This Matters in GMP In GMP-compliant warehouses, material storage must not only preserve quality...

Use Air Curtains and Traps to Prevent Pest Entry into GMP Facilities

digi — Thu, 09 Oct 2025 23:21:58 +0000

Use Air Curtains and Traps to Prevent Pest Entry into GMP Facilities Do Use Air Curtains and Traps to Block Pest Entry into GMP Zones Remember: Always install air curtains and traps at strategic GMP facility entry points to prevent pest intrusion and maintain a contamination-free environment. Why This Matters in GMP Pest ingress is...

Log Power Interruptions in Utility Systems for GMP Impact Assessment

digi — Tue, 07 Oct 2025 12:03:56 +0000

Log Power Interruptions in Utility Systems for GMP Impact Assessment Do Log Power Interruptions in GMP Utility Systems Remember: Always record utility power failures — even short outages can disrupt GMP processes and require impact evaluation. Why This Matters in GMP Utility systems such as HVAC, purified water (PW), WFI, compressed air, and cold storage...

Label Disposal Bins Clearly Based on GMP Waste Type

digi — Fri, 03 Oct 2025 14:21:53 +0000

Label Disposal Bins Clearly Based on GMP Waste Type Assign and Label Disposal Bins According to Waste Type in GMP Areas Remember: Always use clearly labeled disposal bins segregated by waste type — this ensures GMP-compliant waste handling and minimizes cross-contamination risks. Why This Matters in GMP GMP environments generate different types of waste —...

Clean and Sanitize Test Tube Racks in GMP Laboratories Regularly

digi — Tue, 30 Sep 2025 09:18:53 +0000

Clean and Sanitize Test Tube Racks in GMP Laboratories Regularly Always Clean and Sanitize Test Tube Racks in GMP Laboratories Remember: Ensure test tube racks in all GMP labs are routinely cleaned and sanitized — neglecting this step risks contamination and procedural non-compliance. Why This Matters in GMP Test tube racks may appear to be...

Use Only OEM Parts for Equipment to Maintain GMP System Integrity

digi — Wed, 24 Sep 2025 19:30:40 +0000

Use Only OEM Parts for Equipment to Maintain GMP System Integrity Do Not Replace Equipment Parts with Non-OEM Alternatives in GMP Systems Remember: Always use original equipment manufacturer (OEM) parts for GMP systems — substitutes may affect validation status, performance, and compliance. Why This Matters in GMP GMP equipment is qualified using specific components that...